当前位置： 首页 > news >正文

k8s集群环境搭建（一主二从--kubeadm安装）

news 来源：原创 2024/9/21 8:06:21

前置条件

版本：CentOS Linux release 7.5.1804 (Core)

内存：2G

CPU：2

主机名解析
vim /etc/hosts
192.168.109.100 master
192.168.109.101 node1
192.168.109.102 node2时间同步，这里直接使用chronyd服务从网络同步时间systemctl start chronyd
systemctl enable chronyd
date
#查看时间是否同步禁用iptables和firewalld服务
#关闭防火墙和iptables
systemctl stop firewalld
systemctl disabled firewalldsystemctl stop iptables
systemctl disabled iptables禁用selinux
selinux是linux系统下的一个安全服务，如果不关闭它，在安装集群中会产生各种各样的奇葩问题~~~powershell
# 编辑 /etc/selinux/config 文件，修改SELINUX的值为disabled
# 注意修改完毕之后需要重启linux服务
vim /etc/selinux/config
SELINUX=disabled禁用swap分区# 编辑分区配置文件/etc/fstab，注释掉swap分区一行
# 注意修改完毕之后需要重启linux服务UUID=455cc753-7a60-4c17-a424-7741728c44a1 /boot    xfs     defaults        0 0/dev/mapper/centos-home /home                      xfs     defaults        0 0
# /dev/mapper/centos-swap swap                      swap    defaults        0 0修改linux的内核参数vim /etc/sysctl.d/kubernetes.confnet.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1# 重新加载配置
sysctl -p
# 加载网桥过滤模块
modprobe br_netfilter
# 查看网桥过滤模块是否加载成功    
lsmod | grep br_netfilter配置ipvs功能在kubernetes中service有两种代理模型，一种是基于iptables的，一种是基于ipvs的两者比较的话，ipvs的性能明显要高一些，但是如果要使用它，需要手动载入ipvs模块~~~powershell
# 1 安装ipset和ipvsadm
[root@master ~]# yum install ipset ipvsadm -y# 2 添加需要加载的模块写入脚本文件
cat <<EOF >  /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF# 3 为脚本文件添加执行权限chmod +x /etc/sysconfig/modules/ipvs.modules# 4 执行脚本文件/bin/bash /etc/sysconfig/modules/ipvs.modules# 5 查看对应的模块是否加载成功
lsmod | grep -e ip_vs -e nf_conntrack_ipv4重启服务器
reboot

安装docker

切换镜像源

wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo

查看当前镜像源中支持的docker版本

yum list docker-ce --showduplicates

安装特定版本的docker-ce
#必须指定--setopt=obsoletes=0，否则yum会自动安装更高版本

yum install --setopt=obsoletes=0 docker-ce-18.06.3.ce-3.el7 -y

自己找一个上边列表中有的安装就行，这里以docker-ce-18.06.3.ce-3.el7为例

 添加一个配置文件
# Docker在默认情况下使用的Cgroup Driver为cgroupfs，而kubernetes推荐使用systemd来代替cgroupfs
 

mkdir /etc/docker
cat <<EOF >  /etc/docker/daemon.json
{"exec-opts": ["native.cgroupdriver=systemd"],"registry-mirrors": ["https://kn0t2bca.mirror.aliyuncs.com"]
}
EOF

启动docker
 

systemctl restart docker
systemctl enable docker

验证是否安装完成

docker version
docker ps -a

安装kubernetes组件

# 由于kubernetes的镜像源在国外，速度比较慢，这里切换成国内的镜像源
# 编辑/etc/yum.repos.d/kubernetes.repo，添加下面的配置 

vim /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpghttp://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

安装kubeadm、kubelet和kubectl
版本可以自定义，但需要保证三个主机的版本完全相同

 yum install --setopt=obsoletes=0 kubeadm-1.17.4-0 kubelet-1.17.4-0 kubectl-1.17.4-0 -y

# 配置kubelet的cgroup
# 编辑/etc/sysconfig/kubelet，添加下面的配置
 

vim /etc/sysconfig/kubeletKUBELET_CGROUP_ARGS="--cgroup-driver=systemd"
KUBE_PROXY_MODE="ipvs"

设置kubelet开机自启

 systemctl enable kubelet

### 准备集群镜像

~~~powershell
# 在安装kubernetes集群之前，必须要提前准备好集群需要的镜像，所需镜像可以通过下面命令查看

kubeadm config images list

这个是建议的镜像版本，你出现多少版本就用多少，并按我下面这个格式修改版本

# 下载镜像
# 此镜像在kubernetes的仓库中,由于网络原因,无法连接，下面提供了一种替代方案images=(kube-apiserver:v1.17.4kube-controller-manager:v1.17.4kube-scheduler:v1.17.4kube-proxy:v1.17.4pause:3.1etcd:3.4.3-0coredns:1.6.5
)for imageName in ${images[@]} ; dodocker pull registry.cn-hangzhou.aliyuncs.com/google_containers/$imageNamedocker tag registry.cn-hangzhou.aliyuncs.com/google_containers/$imageName 		k8s.gcr.io/$imageNamedocker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/$imageName
done

下载卡住可重新执行for循环这段

集群初始化

下面开始对集群进行初始化，并将node节点加入到集群中

> 下面的操作只需要在`master`节点上执行即可

kubeadm init \--kubernetes-version=v1.17.4 \--pod-network-cidr=10.244.0.0/16 \--service-cidr=10.96.0.0/12 \--apiserver-advertise-address=192.168.109.100#ip改为你自己的masterip
# 创建必要文件
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config
~~~

上述代码会在完成kubeadm init后自动弹出

> 下面的操作只需要在`node`节点上执行即可
# 将node节点加入集群
下边这段代码也在完成kubeadm init后自动弹出

kubeadm join 192.168.109.100:6443 \ --token 8507uc.o0knircuri8etnw2 \--discovery-token-ca-cert-hash \sha256:acc37967fb5b0acf39d7598f8a439cc7dc88f439a3f4d0c9cae88e7901b9d3f

查看集群状态

查看集群状态 此时的集群状态为NotReady，这是因为还没有配置网络插件
[root@master ~]# kubectl get nodes
NAME     STATUS     ROLES    AGE     VERSION
master   NotReady   master   6m43s   v1.17.4
node1    NotReady   <none>   22s     v1.17.4
node2    NotReady   <none>   19s     v1.17.4

安装网络插件

kubernetes支持多种网络插件，比如flannel、calico、canal等等，任选一种使用即可，本次选择flannel

 wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

# 修改文件中quay.io仓库为quay-mirror.qiniu.com

# 使用配置文件启动fannel


kubectl apply -f kube-flannel.yml
# 稍等片刻，再次查看集群节点的状态
[root@master ~]# kubectl get nodes
NAME     STATUS   ROLES    AGE     VERSION
master   Ready    master   15m     v1.17.4
node1    Ready    <none>   8m53s   v1.17.4
node2    Ready    <none>   8m50s   v1.17.4

在此提供一个改好的yml,需要的话直接复制

vim kube-flannel.yml

---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:name: psp.flannel.unprivilegedannotations:seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/defaultseccomp.security.alpha.kubernetes.io/defaultProfileName: docker/defaultapparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/defaultapparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:privileged: falsevolumes:- configMap- secret- emptyDir- hostPathallowedHostPaths:- pathPrefix: "/etc/cni/net.d"- pathPrefix: "/etc/kube-flannel"- pathPrefix: "/run/flannel"readOnlyRootFilesystem: false# Users and groupsrunAsUser:rule: RunAsAnysupplementalGroups:rule: RunAsAnyfsGroup:rule: RunAsAny# Privilege EscalationallowPrivilegeEscalation: falsedefaultAllowPrivilegeEscalation: false# CapabilitiesallowedCapabilities: ['NET_ADMIN']defaultAddCapabilities: []requiredDropCapabilities: []# Host namespaceshostPID: falsehostIPC: falsehostNetwork: truehostPorts:- min: 0max: 65535# SELinuxseLinux:# SELinux is unused in CaaSPrule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:name: flannel
rules:- apiGroups: ['extensions']resources: ['podsecuritypolicies']verbs: ['use']resourceNames: ['psp.flannel.unprivileged']- apiGroups:- ""resources:- podsverbs:- get- apiGroups:- ""resources:- nodesverbs:- list- watch- apiGroups:- ""resources:- nodes/statusverbs:- patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:name: flannel
roleRef:apiGroup: rbac.authorization.k8s.iokind: ClusterRolename: flannel
subjects:
- kind: ServiceAccountname: flannelnamespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:name: flannelnamespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:name: kube-flannel-cfgnamespace: kube-systemlabels:tier: nodeapp: flannel
data:cni-conf.json: |{"name": "cbr0","cniVersion": "0.3.1","plugins": [{"type": "flannel","delegate": {"hairpinMode": true,"isDefaultGateway": true}},{"type": "portmap","capabilities": {"portMappings": true}}]}net-conf.json: |{"Network": "10.244.0.0/16","Backend": {"Type": "vxlan"}}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-ds-amd64namespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: beta.kubernetes.io/osoperator: Invalues:- linux- key: beta.kubernetes.io/archoperator: Invalues:- amd64hostNetwork: truetolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-amd64command:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-amd64command:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-ds-arm64namespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: beta.kubernetes.io/osoperator: Invalues:- linux- key: beta.kubernetes.io/archoperator: Invalues:- arm64hostNetwork: truetolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-arm64command:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-arm64command:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-ds-armnamespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: beta.kubernetes.io/osoperator: Invalues:- linux- key: beta.kubernetes.io/archoperator: Invalues:- armhostNetwork: truetolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-armcommand:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-armcommand:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-ds-ppc64lenamespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: beta.kubernetes.io/osoperator: Invalues:- linux- key: beta.kubernetes.io/archoperator: Invalues:- ppc64lehostNetwork: truetolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-ppc64lecommand:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-ppc64lecommand:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg
---
apiVersion: apps/v1
kind: DaemonSet
metadata:name: kube-flannel-ds-s390xnamespace: kube-systemlabels:tier: nodeapp: flannel
spec:selector:matchLabels:app: flanneltemplate:metadata:labels:tier: nodeapp: flannelspec:affinity:nodeAffinity:requiredDuringSchedulingIgnoredDuringExecution:nodeSelectorTerms:- matchExpressions:- key: beta.kubernetes.io/osoperator: Invalues:- linux- key: beta.kubernetes.io/archoperator: Invalues:- s390xhostNetwork: truetolerations:- operator: Existseffect: NoScheduleserviceAccountName: flannelinitContainers:- name: install-cniimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-s390xcommand:- cpargs:- -f- /etc/kube-flannel/cni-conf.json- /etc/cni/net.d/10-flannel.conflistvolumeMounts:- name: cnimountPath: /etc/cni/net.d- name: flannel-cfgmountPath: /etc/kube-flannel/containers:- name: kube-flannelimage: quay-mirror.qiniu.com/coreos/flannel:v0.12.0-s390xcommand:- /opt/bin/flanneldargs:- --ip-masq- --kube-subnet-mgrresources:requests:cpu: "100m"memory: "50Mi"limits:cpu: "100m"memory: "50Mi"securityContext:privileged: falsecapabilities:add: ["NET_ADMIN"]env:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.name- name: POD_NAMESPACEvalueFrom:fieldRef:fieldPath: metadata.namespacevolumeMounts:- name: runmountPath: /run/flannel- name: flannel-cfgmountPath: /etc/kube-flannel/volumes:- name: runhostPath:path: /run/flannel- name: cnihostPath:path: /etc/cni/net.d- name: flannel-cfgconfigMap:name: kube-flannel-cfg

 服务部署
 

接下来在kubernetes集群中部署一个nginx程序，测试下集群是否在正常工作。以部署nginx为例

# 部署nginxkubectl create deployment nginx --image=nginx:1.14-alpine# 暴露端口kubectl expose deployment nginx --port=80 --type=NodePort
# 查看服务状态
[root@master ~]# kubectl get pods,service
NAME                         READY   STATUS    RESTARTS   AGE
pod/nginx-86c57db685-fdc2k   1/1     Running   0          18mNAME                 TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
service/kubernetes   ClusterIP   10.96.0.1       <none>        443/TCP        82m
service/nginx        NodePort    10.104.121.45   <none>        80:30073/TCP   17m

成功

相关文章：

  • 北京网站建设多少钱？
  • 辽宁网页制作哪家好_网站建设
  • 高端品牌网站建设_汉中网站制作
  • 人工智能再次进化 善用AI提升营运效率
  • 小哥进小区难进门难，此现状如何破局?
  • javaee、ssm（maven）、springboot（maven）项目目录结构以及编译后文件目录存放路径
  • anomaly detection
  • FreeRTOS线程数据传递---消息队列
  • Git如何安装和配置
  • 详解PASCAL VOC数据集及基于Python和PyTorch的下载、解析及可视化【目标检测+类别分割】
  • QT5.14.2编译有界面的DLL供C#Winform程序调用步骤
  • C#编程语言及.NET 平台快速入门指南
  • 高级java每日一道面试题-2024年9月02日-基础篇-什么是脏读、不可重复读和幻读？
  • 2020年ICPC南京站 补题记录
  • Kevin‘s notes about Qt---Episode 2 线程通信
  • 突破编程_C++_设计模式(组合模式)
  • C#知识|加强面向对象编程的认识
  • 2024年【氧化工艺】考试及氧化工艺最新解析
  • 07.Android之多媒体问题
  • AzureCon上微软宣布了哪些容器相关的重磅消息
  • Electron入门介绍
  • HashMap ConcurrentHashMap
  • Javascript Math对象和Date对象常用方法详解
  • PAT A1050
  • Promise面试题2实现异步串行执行
  • Python学习之路16-使用API
  • React as a UI Runtime(五、列表)
  • 京东美团研发面经
  • 利用jquery编写加法运算验证码
  • 你不可错过的前端面试题（一）
  • 前端学习笔记之观察者模式
  • 软件开发学习的5大技巧，你知道吗？
  • 移动互联网+智能运营体系搭建=你家有金矿啊！
  • raise 与 raise ... from 的区别
  • ​ 全球云科技基础设施：亚马逊云科技的海外服务器网络如何演进
  • ​一帧图像的Android之旅 :应用的首个绘制请求
  • # windows 安装 mysql 显示 no packages found 解决方法
  • (办公)springboot配置aop处理请求.
  • （笔记）Kotlin——Android封装ViewBinding之二 优化
  • （附程序）AD采集中的10种经典软件滤波程序优缺点分析
  • （附源码）spring boot车辆管理系统 毕业设计 031034
  • (汇总)os模块以及shutil模块对文件的操作
  • （七）c52学习之旅-中断
  • （三）Honghu Cloud云架构一定时调度平台
  • （十七）devops持续集成开发——使用jenkins流水线pipeline方式发布一个微服务项目
  • ***汇编语言 实验16 编写包含多个功能子程序的中断例程
  • .Net - 类的介绍
  • .net 8 发布了，试下微软最近强推的MAUI
  • .net core webapi Startup 注入ConfigurePrimaryHttpMessageHandler
  • .NET Core WebAPI中使用Log4net 日志级别分类并记录到数据库
  • .NET MAUI Sqlite程序应用-数据库配置（一）
  • .net 获取某一天 在当月是 第几周 函数
  • .Net 执行Linux下多行shell命令方法
  • .NET程序集编辑器/调试器 dnSpy 使用介绍
  • .NET开源、简单、实用的数据库文档生成工具
  • .pyc文件还原.py文件_Python什么情况下会生成pyc文件？
  • /var/lib/dpkg/lock 锁定问题
  • @Controller和@RestController的区别？