当前位置： 首页 > news >正文

【笔记】【开发方案】APN 配置参数 bitmask 数据转换（Android KaiOS）

news 来源：原创 2024/5/20 4:12:39

一、参数说明

（一）APN配置结构对比

平台AndroidKaiOS
文件类型xmljson
结构每个<apn>标签是一条APN，包含完成的信息层级数组结构，使用JSON格式的数据。最外层是mcc，其次mnc，最后APN用数组形式配置（每个APN都是一个对象，不含mccmnc属性）。

Android: apns-conf.xml

<!-- Android: apns-conf.xml -->
<?xml version="1.0" encoding="utf-8"?>
<apns version="8"><apn carrier="T-Mobile US" mcc="001" mnc="01" apn="fast.t-mobile.com" user="" password="" server="" proxy="" port="" mmsc="http://mms.msg.eng.t-mobile.com/mms/wapenc" mmsproxy="" mmsport="" type="default,mms,supl,hipri,xcap,rcs" protocol="IPV6" roaming_protocol="IP" bearer_bitmask="" mvno_type="ecid" mvno_match_data="[4]4310260" class="" user_visible="true" user_editable="true" authtype="0"/>
</apns>

KaiOS: apns.json

特别需要注意格式（很容易出错），数组最后不用加逗号，注意大/中括号的首位一致性。

{
"202": {"10": [{"carrier":"Wind Internet","apn":"gint.b-online.gr","type":["default","supl"]},{"voicemail":"122","type":["operatorvariant"]},{"carrier":"Wind MMS","apn":"mnet.b-online.gr","mmsc":"http://192.168.200.95/servlets/mms","mmsproxy":"192.168.200.11","mmsport":"9401","type":["mms"]}],"01": [{"carrier":"Cosmote Wireless Internet","apn":"","type":["ia"]},{"voicemail":"123","type":["operatorvariant"]},{"carrier":"Cosmote Wireless Internet","apn":"internet","type":["default","supl"]},{"carrier":"Cosmote Mms","apn":"mms","mmsc":"http://mmsc.cosmote.gr:8002","mmsproxy":"10.10.10.20","mmsport":"8080","type":["mms"]}],"09": [{"carrier":"Q Internet","apn":"myq","type":["default","supl"]},{"voicemail":"122","type":["operatorvariant"]},{"carrier":"Q-Telecom MMS GPRS","apn":"q-mms.myq.gr","mmsc":"http://mms.myq.gr","mmsproxy":"192.168.80.134","mmsport":"8080","type":["mms"]}]
},
"001": {"01": [{"carrier":"Testing SIM default","apn":"test","type":["default"],"protocol":"IPV4V6","roaming_protocol":"IPV4V6","user_visible":"true"},{"carrier":"IMS","apn":"ims","type":["ims"],"protocol":"IPV4V6","roaming_protocol":"IPV4V6","user_visible":"true"},{"carrier":"XCAP","apn":"xcap","type":["xcap"],"protocol":"IPV4V6","roaming_protocol":"IPV4V6","user_visible":"true","authtype":"0"}]
}
}

（二）bearer配置值对比

  • 1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20 （The original bearer value in Android，位运算）
  • 1048575（The original bearer value in KaiOS using decimalism)

二、代码解析

（一）Android

待完善

（二）KaiOS

  • DataCallManager.jsm
  • apn_editor_const.js

1、bitmask的进制转换

可以参考PDN建立逻辑，gecko/dom/system/gonk/radio/DataCallManager.jsm

//DataCallManager.jsm//检查对应的rat是否包含在此APN bearer 配置中
// Check rat value include in the bit map or not.
function bitmaskHasTech(aBearerBitmask, aRadioTech) {if (aBearerBitmask == 0) {return true;} else if (aRadioTech > 0) {return (aBearerBitmask & (1 << (aRadioTech - 1))) != 0;}return false;
}//bearer十进制转成二进制
// Show the detail rat type.
function bitmaskToString(aBearerBitmask) {if (aBearerBitmask == 0 || aBearerBitmask === undefined) {return 0;}let val = "";for (let i = 1; i < RIL.GECKO_RADIO_TECH.length; i++) {if ((aBearerBitmask & (1 << (i - 1))) != 0) {val = val.concat(i + "|");}}return val;
}function bearerBitmapHasCdma(aBearerBitmask) {return (RIL_RADIO_CDMA_TECHNOLOGY_BITMASK & aBearerBitmask) != 0;
}

在bitmaskToString接口中，将bitmask转化成String时，循环RIL.GECKO_RADIO_TECH的长度次，经过位运算转换成与Android原始配置的bearer_bitmask相同格式的bearer位符，用“|”间隔rat类型位。

是如何通过RIL调用ril_consts.js内的GECKO_RADIO_TECH？

在DataCallManager.jsm 中定义RIL对象，并使用XPCOMUtils.defineLazyGetter()方法来实现懒加载，即在要使用时才加载和初始化对象（只有在第一次访问该对象时才会进行初始化和加载），避免不必要的性能开销和资源浪费。
RIL对象是通过ChromeUtils.import 方法从ril_consts.js文件中导入的，该对象由ril_consts.js文件中的代码创建和初始化的。

//DataCallManaer.jsm"use strict";//XPCOM 是一个用于 实现跨语言组件的技术框架。
//导入XPCOMUtils对象（工具库），简化和封装XPCOM组件的开发和使用。
//使用常量const来定义 XPCOMUtils 对象，以确保在运行时不会发生对象被重新赋值的情况。
const { XPCOMUtils } = ChromeUtils.import("resource://gre/modules/XPCOMUtils.jsm"
);//定义RIL对象，后续调用 RIL.GECKO_RADIO_TECH
XPCOMUtils.defineLazyGetter(this, "RIL", function() {return ChromeUtils.import("resource://gre/modules/ril_consts.js");
});//ref RIL.GECKO_RADIO_TECH
const TCP_BUFFER_SIZES = [null,"4092,8760,48000,4096,8760,48000", // gprs"4093,26280,70800,4096,16384,70800", // edge"58254,349525,1048576,58254,349525,1048576", // umts"16384,32768,131072,4096,16384,102400", // is95a = 1xrtt"16384,32768,131072,4096,16384,102400", // is95b = 1xrtt"16384,32768,131072,4096,16384,102400", // 1xrtt"4094,87380,262144,4096,16384,262144", // evdo0"4094,87380,262144,4096,16384,262144", // evdoa"61167,367002,1101005,8738,52429,262114", // hsdpa"40778,244668,734003,16777,100663,301990", // hsupa = hspa"40778,244668,734003,16777,100663,301990", // hspa"4094,87380,262144,4096,16384,262144", // evdob"131072,262144,1048576,4096,16384,524288", // ehrpd"524288,1048576,2097152,262144,524288,1048576", // lte"122334,734003,2202010,32040,192239,576717", // hspa+"4096,87380,110208,4096,16384,110208", // gsm (using default value)"4096,87380,110208,4096,16384,110208", // tdscdma (using default value)"122334,734003,2202010,32040,192239,576717", // iwlan"122334,734003,2202010,32040,192239,576717", // ca
];//定义了一个常量RIL_RADIO_CDMA_TECHNOLOGY_BITMASK，用于表示CDMA射频技术类型的掩码值。
//RIL.GECKO_RADIO_TECH.indexOf 查找各个CDMA技术类型在GECKO_RADIO_TECH数组中的下标值，
//-1 的目的是得到对应的掩码位数，并将此转换成掩码值，
//使用按位左移（<<）运算符得到掩码值，
//各个掩码值按位或（|）操作得到最终的掩码值。
const RIL_RADIO_CDMA_TECHNOLOGY_BITMASK =(1 << (RIL.GECKO_RADIO_TECH.indexOf("is95a") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("is95b") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("1xrtt") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("evdo0") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("evdoa") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("evdob") - 1)) |(1 << (RIL.GECKO_RADIO_TECH.indexOf("ehrpd") - 1));// set to true in ril_consts.js to see debug messages
var DEBUG = RIL_DEBUG.DEBUG_RIL;   //调试用的log打印标识符

如上代码，CDMA技术类型对应的掩码值RIL_RADIO_CDMA_TECHNO如下：

is95a: 1 << (5-1) = 0x10
is95b: 1 << (6-1) = 0x20
1xrtt: 1 << (7-1) = 0x40
evdo0: 1 << (8-1) = 0x80
evdoa: 1 << (9-1) = 0x100
evdob: 1 << (14-1) = 0x2000
ehrpd: 1 << (15-1) = 0x4000

2、GECKO_RADIO_TECH 定义网络制式 (ril_consts.js)

在KaiOS中，RIL.GECKO_RADIO_TECH数组是在Gecko内核的代码中定义的，其实现位于Gecko代码库的"gecko/dom/system/gonk/radio/ril_consts.js"文件中。该文件定义了一系列RIL层的常量，包括射频技术类型、消息ID等。在该文件中，可以找到以下代码片段，其中定义了RIL.GECKO_RADIO_TECH数组的元素和顺序：

//GECKO_RADIO_TECH 数组定义射频技术（网络连接）
this.GECKO_RADIO_TECH = [null,"gprs",     //1 GPRS"edge",     //2 EDGE"umts",     //3 UMTS"is95a",    //4 IS-95A"is95b",    //5 IS-95B"1xrtt",    //6 cdma1x?一种CDMA2000射频技术，是CDMAOne技术的升级版(1x Radio Transmission Technology)"evdo0",    //7 EVDO-0"evdoa",    //8 EVDO-A"hsdpa",    //9"hsupa",    //10"hspa",     //11"evdob",    //12 EVDO-B"ehrpd",    //13 EVDO-D"lte",      //14 LTE"hspa+",    //15 HSPA+"gsm",      //16 GSM"tdscdma",  //17 TD-SCDMA"iwlan",    //18 iWLAN(wifi)"lte_ca",   //19 LTE_CA
];//定义遵循的协议类型
this.GECKO_PROFILE_INFO_TYPE_COMMON = 0;
this.GECKO_PROFILE_INFO_TYPE_3GPP = 1;
this.GECKO_PROFILE_INFO_TYPE_3GPP2 = 2;

3、DataCall 对 rat 的使用案例

  dataRegistrationChanged(aRadioTech) {let targetBearer;if (this.apnSetting.bearer === undefined) {targetBearer = 0;} else {targetBearer = this.apnSetting.bearer;}if (DEBUG) {this.debug("dataRegistrationChanged: targetBearer: " +bitmaskToString(targetBearer));}if (bitmaskHasTech(targetBearer, aRadioTech)) {// Ignore same rat type. Let handler process the retry.} else {if (DEBUG) {this.debug("dataRegistrationChanged: current APN do not support this rat reset DC. APN:" +JSON.stringify(this.apnSetting));// Clean the requestedNetworkInterfaces due to current DC can not support this rat under DC retrying state.// Let handler process the retry.let targetRequestedNetworkInterfaces = this.requestedNetworkInterfaces.slice();for (let networkInterface of targetRequestedNetworkInterfaces) {this.disconnect(networkInterface);}}},

gecko/koost/telephony/TelephonyBinderService.h

// Cover the GECKO_RADIO_TECH to NETWORK_TYPE_*
int32_t convertRadioTech(const nsAString& rat);

4、apn_editor_const.js 原始数据和 UI显示转换

KaiOS 基线提供了VALUE_CONVERTERS 常量对象，包含两个属性：TO_STRING和TO_DATA，每个属性包含了转换方法。

  • TO_STRING：将一个字符串数组转换成一个用逗号分隔的字符串
    • apn_editor.js 界面显示用
  • TO_DATA ：将一个用逗号分隔的字符串转换为一个字符串数组
    • apn_editor_session.js 保存数据库用

源码如下，可参考APN Type显示的内容，对数组进行显示和配置数据存储。

/*** The apn editor const*/define([],() => {const APN_PROPERTY_DEFAULTS = {//省略大部分原生属性apn: '',types: ['default'],roaming_protocol: 'notDefined',//自定义mvno_type: 'notDefined',mvno_match_data: '',bearer:['unspecified']};const APN_PROPERTIES = Object.keys(APN_PROPERTY_DEFAULTS);//数据转换工具接口const VALUE_CONVERTERS = {TO_STRING: { //TO_STRING属性types(types) {//判断 types参数存在、是一个数组、且数组非空，就将字符串数组转换成用逗号分隔的字符串// types ：参数是否存在// Array.isArray(types)：是否为一个数组// types.length：数组是否非空if (types && Array.isArray(types) && types.length) {return types.join(', ');}return 'default'; //默认返回“default”}},TO_DATA: { //TO_DATA属性types(string) {//将用逗号分隔的字符串转换为字符串数组return string.split(',').map(str => str.trim());}}};//在apn_editor.js中定义了常量调用方法，APN_PROPERTIES、APN_PROPERTY_DEFAULTS、VALUE_CONVERTERSreturn { //一个对象，三个只读get属性？外部访问但不能修改他们的值？get APN_PROPERTIES() {return APN_PROPERTIES;},get APN_PROPERTY_DEFAULTS() {return APN_PROPERTY_DEFAULTS;},get VALUE_CONVERTERS() {return VALUE_CONVERTERS;}};
});
（1）测试代码

 对以上接口VALUE_CONVERTERS的测试代码和解析，输出案例 ：

const types = ['gprs', 'edge', 'umts'];
const str = VALUE_CONVERTERS.TO_STRING.types(types);
console.log(str); // 输出 'gprs, edge, umts'const str = 'gprs, edge, umts';
const types = VALUE_CONVERTERS.TO_DATA.types(str);
console.log(types); // 输出 ['gprs', 'edge', 'umts']
（2）apn_editor.js 调用TO_STRING 界面显示

外部模块调用源码实现

/*** The apn editor module*/
'use strict';
define(function(require) { //eslint-disable-lineconst ApnEditorConst = require('panels/apn_editor/apn_editor_const');const ApnEditorSession = require('panels/apn_editor/apn_editor_session');//引用apn_editor_const.js 定义常量const { APN_PROPERTIES } = ApnEditorConst;const { APN_PROPERTY_DEFAULTS } = ApnEditorConst;const { VALUE_CONVERTERS } = ApnEditorConst;ApnEditor.prototype = {convertValue(value, converter) {if (converter) {return converter(value);}return value;},fillInputElements(inputElements, apn) {APN_PROPERTIES.forEach(function input(name) {const inputElement = inputElements[name];if (inputElement) {//数据处理，调用VALUE_CONVERTERS 转成字符串inputElement.value = this.convertValue(value,VALUE_CONVERTERS.TO_STRING[name]);} //if inputElement}, this);},});
（3）apn_editor_session.js 保存信息到APN数据库

在commit 中保存APN到，通过apn manager执行addApn或 updateApn

/*** The apn editor session module*/
define(['require','modules/apn/apn_settings_manager','panels/apn_editor/apn_editor_const','modules/apn/apn_utils'],function(require) { //eslint-disable-lineconst ApnSettingsManager = require('modules/apn/apn_settings_manager');const ApnEditorConst = require('panels/apn_editor/apn_editor_const');const ApnUtils = require('modules/apn/apn_utils');const { APN_PROPERTIES } = ApnEditorConst;const { VALUE_CONVERTERS } = ApnEditorConst;function ApnEditorSession(obj, inputElements, apnItem) {this.serviceId = obj.serviceId;this.apnMode = obj.mode;this.inputElements = inputElements;this.apnItem = apnItem;}ApnEditorSession.prototype = {convertValue(value, converter) {if (converter) {return converter(value);}return value;},exportApnSetting(inputElements) {const newApnSetting = {};APN_PROPERTIES.forEach(function input(name) {const inputElement = inputElements[name];if (inputElement && !inputElement.hidden) {newApnSetting[name.toLowerCase()] = this.convertValue(inputElement.value,VALUE_CONVERTERS.TO_DATA[name]);}}, this);return newApnSetting;},//保存新增APN数据，调用addApncommitNew() {const promises = [];const newApnSetting = this.exportApnSetting(this.inputElements);promises.push(ApnSettingsManager.addApn(this.serviceId, newApnSetting));return Promise.all(promises);},//保存编辑APN数据，调用updateApncommitEdit() {const promises = [];const newApnSetting = this.exportApnSetting(this.inputElements);promises.push(ApnSettingsManager.updateApn(this.serviceId,this.apnItem.id, newApnSetting));return Promise.all(promises);},//在apn_editor.js中传递  new/edit选择执行新增/编辑APNcommit() {switch (this.apnMode) {case 'new':return this.commitNew();case 'edit':return this.commitEdit();default:console.error('invalid mode');return Promise.resolve();}},//取消，不保存任何数据cancel() {APN_PROPERTIES.forEach(function input(name) {this.inputElements[name].value = '';}, this);this.apnItem = null;},//还没找到mode的用法get mode() {return this.apnMode;}};return function apnEditorSession(obj, inputElements, apnItem) {return new ApnEditorSession(obj, inputElements, apnItem);};
});

三、日志分析

追溯在PDN建立过程中，读取apn配置的bearer参数到DataCall使用的radio类型的bearer值变化情况。

四、方案开发

相关介绍：KaiOS 新增APN信息字段的代码实现-CSDN博客

在 APN Editor中实现bearer显示

代码模块：gaia/apps/settings/js/panels/apn_editor/apn_editor.js

/*** The apn editor module*/
'use strict';
define(function(require) { //eslint-disable-lineconst ApnEditorConst = require('panels/apn_editor_tct/apn_editor_const');const ApnEditorSession = require('panels/apn_editor_tct/apn_editor_session');const ApnUtils = require('modules/apn_tct/apn_utils');//以下三个常量都是从ApnEditorConst模块中导入的const { APN_PROPERTIES } = ApnEditorConst;const { APN_PROPERTY_DEFAULTS } = ApnEditorConst;const { VALUE_CONVERTERS } = ApnEditorConst;return function apnEditor(rootElement) {return new ApnEditor(rootElement);};
});

（一）KaiOS

1、十进制bearer -> bitmask位码 & networkType字符

将kaios中十进制的bearer转换同Android原始配置的bitmask及映射网络类型字符串

// 功能：将十进制bearer转换成1-20字符串（同Android）
function bitmaskToString(aBearerBitmask) {if (aBearerBitmask == 0 || aBearerBitmask === undefined) {return 0;}let val = "";for (let i = 1; i < 20; i++) {if ((aBearerBitmask & (1 << (i - 1))) != 0) {val = val.concat(i + "|");}}return val;
}//常量数组，定义rat。
//最后一个数据到底要不要逗号？源码有，参考代码可以不用 —— 兼容性问题，新的会支持 ，
const GECKO_RADIO_TECH = [null,"gprs","edge","umts","is95a","is95b","1xrtt","evdo0","evdoa","hsdpa","hsupa","hspa","evdob","ehrpd","lte","hspa+","gsm","tdscdma","iwlan","lte_ca",
];//将1-20的bitmask转换成对应的网络制式
function bitmaskToRatString(aBitmask) {if (aBitmask == 0 || aBitmask === undefined) {return "unspecified";}let rat = "";let splitResult = aBitmask.split("|");console.log('splitResult = '+ splitResult);rat = splitResult.map(x => GECKO_RADIO_TECH[x]).join(",").slice(0,-1);//slice(startIndex,endIndex) 用于去掉最后一个逗号return rat;
}// 测试代码
let apnBearer = '312312';  //apn.json原始配置值
let targetBearer;  //1-20转换目标值
let bearerString = '';if (apnBearer === undefined) {targetBearer = 0;
} else {targetBearer = apnBearer;
}bearerString = bitmaskToString(targetBearer);
let ratString = bitmaskToRatString(bearerString);// 输出结果
console.log('targetBearer = ' + targetBearer);
console.log('bearerString = '+ bearerString);
console.log('ratString = ' + ratString);

存在一个问题 ，在UI显示了rat的字符串，那么 commitEdit() 的时候会保存bearer为字符串，应该需要在apn_editor_session.js 中处理ApnSettings内容。

难点在于如何将gprs,edge,is95b,1xrtt 转换成bearer数值 （ bitmask=1|2|5|6 甚至是 十进制原文）

2、networktype字符 -> bitmask 位码

convertNetworkTypeToBitmask，将networktype字符串转换成bitmask（1|18|20格式）

//映射表，包含了不同的网络类型和对应的数字码。
const networkTypeMap = {"unspecified": "0","gprs": "1","edge": "2","umts": "3","is95a": "4","is95b": "5","1xrtt": "6","evdo0": "7","evdoa": "8","hsdpa": "9","hsupa": "10","hspa": "11","evdob": "12","ehrpd": "13","lte": "14","hspa+": "15","gsm": "16","tdscdma": "17","iwlan": "18","lte_ca": "19"
};//测试代码
//一、简单程序 
let bearerString = "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"; //界面显示字符串包含多个网络类型，使用逗号分隔
let networkTypes  = bearerString.split(","); //string转换成字符串数组
let bitCode =  Array.from(networkTypes, bearerString => networkTypeMap[bearerString]); //将字符串数组转换成数字码数组
let bitmask = bitCode.join("|");console.log("networkTypes = " + networkTypes);
console.log("bitCode = " + bitCode);//二、改善，封装成接口调用
//参数类型：字符串 "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"
//let bearerString = "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"; 
function convertNetworkTypeToBitmask(aNetworkTypes) {let bitmask = '0'; //初始化为0和"0"的区别？if (aNetworkTypes == 0 || aNetworkTypes === undefined) {return 0;}//networkTypesArray是一个字符串数组，存储着多个网络类型的字符串，例如 ['gprs', 'edge']let networkTypesArray = aNetworkTypes.split(","); //字符串转成字符串数组//networkTypesBitCode是一个数字码数组，如[ '1', '2', '3' ]//映射函数对每个字符串进行转换，函数参数是每个字符串，它在映射表中对应的值就是所需bit位数字码//映射函数的代码为 aNetworkTypes => networkTypeMap[aNetworkTypes]let networkTypesBitCode = Array.from(networkTypesArray, aNetworkTypes => networkTypeMap[aNetworkTypes]); //字符串数组转换成功数字码 bitmask = networkTypesBitCode.join("|");return bitmask;
}console.log("bitmask(api) = " + convertNetworkTypeToBitmask(bearerString));

//如果传参是数组，就更简单的封装接口了
//接受一个包含网络类型的数组作为参数，并将这个数组中的每种网络类型转换为对应的数字码，
//返回一个由数字码组成的字符串，使用"|"符号分隔，即bitmask//通过map()方法遍历这个数组，将每种网络类型转换为对应的数字码，存在codes数组
//通过join()方法将codes数字码连接成字符串 ，用“|”符号分隔。function convertNetworkTypes(networkTypes) {const codes = networkTypes.map(type => networkTypeMap[type]);return codes.join("|");
}const types = ["gprs", "edge", "is95b", "1xrtt"];
const codeString = convertNetworkTypes(types);  // "1|2|5|6"

3、networktype字符 -> 十进制bearer

用如下bitcode数组能便于转换成 bitmask位码和十进制，不能直接通过bitmask转换成十进制，即bitmask 位码 -> 十进制bearer

 bitcode = 1,2,3,9,10,11,14,15

const NETWORK_TYPE_MAP = {"unspecified": "0","gprs": "1","edge": "2","umts": "3","is95a": "4","is95b": "5","1xrtt": "6","evdo0": "7","evdoa": "8","hsdpa": "9","hsupa": "10","hspa": "11","evdob": "12","ehrpd": "13","lte": "14","hspa+": "15","gsm": "16","tdscdma": "17","iwlan": "18","lte_ca": "19"
};//参数类型：字符串 "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"
//let bearerString = "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"; 
function convertNetworkTypeToBitCode(aNetworkTypes) {console.log("convertBitcodeToBearer: aNetworkTypes = " + aNetworkTypes);let bitcode = '0';if (aNetworkTypes == 0 || aNetworkTypes === undefined) {return 0;}let networkTypesArray = aNetworkTypes.split(","); //字符串转成字符串数组bitcode = Array.from(networkTypesArray, aNetworkTypes => NETWORK_TYPE_MAP[aNetworkTypes]); //  console.log("convertNetworkTypeToBitCode: bitcode = " + bitcode);return bitcode;
}function convertBitCodeToBitmask(aBitCode) {let bitmask = aBitCode.join("|");console.log("convertBitCodeToBitmask: bitmask = " + bitmask);return bitmask;
}function convertBitcodeToBearer(aBitCode) {let bearerDec = 0;let bearerBin =0;if (aBitCode == 0 || aBitCode === undefined) {return 0;}//parseInt((code).toString(2)) 是将数字 code转成二进制字符串bearerBin = aBitCode.map(code => parseInt(code).toString(2)).join(""); //转成二进制console.log("convertBitcodeToBearer: bearerBin = " + bearerBin);bearerDec = parseInt(bearerBin,2);//将二进制转换成十进制 。console.log("convertBitcodeToBearer: bearerDec = " + bearerDec);return bearerDec;
}let bearerString = "gprs,edge,umts,hsdpa,hsupa,hspa,lte,hspa+"; //界面显示字符串包含多个网络类型，使用逗号分隔convertBitCodeToBitmask(convertNetworkTypeToBitCode(bearerString));
convertBitcodeToBearer(convertNetworkTypeToBitCode(bearerString));

bearerBin  存在问题，在bitcode 转成20位二进制数的时候，输出的bearerBin 不正确

优化以上代码：

  function convertNetworkTypeToBearer(aNetworkTypes) {dump('apn_editor_session: StringToBearer aNetworkTypes = ' + aNetworkTypes);if (aNetworkTypes == 0 || aNetworkTypes === undefined) {return 0;}let bitcode = '0';let bearerBin = "";let bearer = 0;let networkTypesArray = aNetworkTypes.split(",");bitcode = Array.from(networkTypesArray, aNetworkTypes => NETWORK_TYPE_MAP[aNetworkTypes]);  //bitcode array  like [18,14]bitcode =  bitcode.sort(function(a, b) {return a - b;});dump('apn_editor_session: StringToBearer bitcode = ' + bitcode);let bearerArray = new Array(20).fill(0);for (let i = 0; i < bitcode.length; i++) {bearerArray[bitcode[i]-1] = 1;dump('apn_editor: StringToBearer bitcode[i] = ' + bitcode[i]);}dump('apn_editor_session: StringToBearer bearerArray = ' + bearerArray);bearerBin = bearerArray.reverse().join("");bearer = parseInt(bearerBin,2);dump('apn_editor_session: StringToBearer bearer = ' + bearer);return bearer;}

相关文章：

  • 数字热潮：iGaming 能否推动加密货币的普及？
  • 【LeetCode-337】打家劫舍III(动态规划)
  • vivado FSM Components
  • 云HIS系统源码，基于云计算技术的B/S架构的云HIS系统，二甲医院信息管理系统
  • 【Ubuntu】Anaconda的安装和使用
  • etcd: mac 环境部署
  • Windows+Yolo3-darknet训练自己数据集并测试
  • 【0265】postmaster守护进程入口
  • 学习大数据所需的java基础(5)
  • 【PHP设计模式03】抽象工厂模式
  • 面试经典150题——快乐数
  • 大数据-数据可视化-环境部署vue+echarts+显示案例
  • uniapp：APP端webview拦截H5页面跳转，华为市场发布需要限制webview的H5页面跳转
  • 【Elasticsearch专栏 12】深入探索：Elasticsearch使用索引生命周期管理（ILM）自动化删除旧数据
  • 安卓OpenGL添加水印并录制(二)---抖音录制原理
  • CSS实用技巧
  • Cumulo 的 ClojureScript 模块已经成型
  • JavaScript实现分页效果
  • Mysql优化
  • overflow: hidden IE7无效
  • PyCharm搭建GO开发环境(GO语言学习第1课)
  • Terraform入门 - 1. 安装Terraform
  • vue.js框架原理浅析
  • vue-router的history模式发布配置
  • -- 查询加强-- 使用如何where子句进行筛选，% _ like的使用
  • 记录：CentOS7.2配置LNMP环境记录
  • 开源SQL-on-Hadoop系统一览
  • 开源地图数据可视化库——mapnik
  • 设计模式（12）迭代器模式（讲解+应用）
  • 提醒我喝水chrome插件开发指南
  • 通过npm或yarn自动生成vue组件
  • 一个JAVA程序员成长之路分享
  • 赢得Docker挑战最佳实践
  • 再次简单明了总结flex布局，一看就懂...
  • 在weex里面使用chart图表
  • 06-01 点餐小程序前台界面搭建
  • 3月27日云栖精选夜读 | 从 “城市大脑”实践，瞭望未来城市源起 ...
  • Play Store发现SimBad恶意软件，1.5亿Android用户成受害者 ...
  • #NOIP 2014# day.2 T2 寻找道路
  • #我与Java虚拟机的故事#连载13：有这本书就够了
  • （173）FPGA约束：单周期时序分析或默认时序分析
  • （附源码）spring boot校园拼车微信小程序 毕业设计 091617
  • （十三）Flask之特殊装饰器详解
  • （原+转）Ubuntu16.04软件中心闪退及wifi消失
  • （转）visual stdio 书签功能介绍
  • (转载)OpenStack Hacker养成指南
  • (轉貼) 資訊相關科系畢業的學生，未來會是什麼樣子？(Misc)
  • .NET CF命令行调试器MDbg入门（二） 设备模拟器
  • .NET Core WebAPI中封装Swagger配置
  • .net framework4与其client profile版本的区别
  • .NET 命令行参数包含应用程序路径吗？
  • .NET/C# 阻止屏幕关闭，阻止系统进入睡眠状态
  • .net的socket示例
  • .net反编译的九款神器
  • .NET框架类在ASP.NET中的使用(2) ——QA